The most comprehensive and practical faucet repair method, you can do it yourself after reading this!

Faucet maintenance has always been a topic worthy of attention in kitchens and bathrooms. Failure is inevitable due to frequent use or other reasons, so we should also master some simple faucet maintenance knowledge. Combining some common phenomena and maintenance experience, we will explain in detail how to repair faucets in various situations.

(1) Faucet maintenance process
1. Determine the reason for faucet repair;
2. Prepare maintenance tools (screwdriver, adjustable wrench, waterproof tape, etc.);
3. Close the main water gate;
4. Repair or replace faucets;
5. Reinstall;
6. Open the water gate and test;
7. Clean up the site and call it a day.
(2) Common problems and maintenance methods of faucets
1. The water outlet from the faucet is split or the water volume is reduced, and there are no bubbles
Possible reasons: The bubbler filter is clogged with dirt or debris such as scale.
Solution: Remove the faucet and clean the filter.
2. The main body of the faucet makes noise
Possible reasons: water pressure is too high; hot and cold water pipes are poorly fixed; the faucet handle is closed quickly; there are obstructions or scale in the water inlet pipe.
Solution: Reduce the water supply pressure, avoid closing the faucet quickly and re-construction, clean the pipes, and check whether there is poor contact between the water pipes and connecting objects.
3. The water output of the shower head is small and the water output is divided.

Possible reasons: The water pressure is too low or there is debris blocking or scale accumulation in the shower head.
Solution: Remove the shower head and take out the rubber gasket with filter at the shower inlet or clean the shower head.
4. Temperature adjustment is difficult and water temperature often changes.
Possible reasons: The pressure difference between hot and cold water is too large, or the water heater raises the water temperature for too long.
Solution: Turn down the hot and cold triangle valve to balance the pressure and ensure that the water temperature of the water heater can keep up with the water outlet speed.